Tips For Replacing a Window Handle
The replacement of your window handle is a simple project that can be completed in the at-home comforts of your home. Follow these tips to ensure a smooth and beautiful finish.
Take off the screw covers from your uPVC handle to reveal the screws. Take a measurement of the spindle to be sure you're getting the correct size replacement.
1. Measure the Spindle Length
It's important that you ensure the correct size of the spindle when replacing a window handle. It can influence the tightness or looseness of the handle and whether the handle will lock properly into the window frame. The spindle is a metal shaft that connects the handle to the lock inside the frame of the window. The spindle is available in the standard 8mm cross-section for industry or the more traditional 9mm versions. The modern industry standard is 8mm, but this wasn't always the case. When buying a new handle it is important to check the measurements.
The easiest method of measuring the spindle length is to remove the existing handle This can be accomplished by turning it into an open position, then unscrewing the two screws (which may be hidden behind plastic caps that require removal) that hold the handle. Once removed measure from the base of the handle until the end of the spindle. This will give you the measurement needed to purchase a new one.
There are plenty of choices when it comes to selecting a new window handle, from sleek chrome that blends in with a modern home, to traditional brass that looks stunning in restored Georgian rooms, or the more classic Tudor cottages with curved monkey tail latches! The options are endless but the most important thing is to select a style that is suitable for your home.
Espag handles are usually fitted to uPVC windows and are the same size with 43mm centers (2 fixings). Cockspur handles are available in a range of sizes, from 58mm up to 62mm. Cadenza window handles are different in size since they have an angled blade which operates a multi-point locking mechanism inside the window.
When you are choosing a handle for your window it is important to consider the hand you use to open your door. Inline Espag window handles aren't handed and can be utilized for left or right handed windows. Cranked window handles are only used on windows that open in one direction.
2. Take the handle off
A window handle that is sagging can be a hassle, regardless of regardless of whether the handle has been damaged or worn out. The good news is that you can repair a uPVC handle yourself. You only need the most basic hand tools as well as some time to complete the process.
You must first open the window and ensure that it is not locked. Then, you need to remove the screw caps that hold the handle in position. Once these caps are removed, you are able working on the removal of the handle itself.
The handle is attached to a spindle inside the window frame. Depending on the kind, this is held in place either by a screw or pin. The most popular handles are the inline Espagnolette and the cockspur handles. Both of these kinds of handles are employed on casement windows, which includes aluminium windows. They can be locked using a key to prevent unauthorised opening of the window from outside or by locking them by turning the handle clockwise.
To remove the handle, you will require a flat-bladed screwdriver. When this clip is released the handle will slide off the spindle. After the handle has been removed, you'll have to determine the length of the spindle and ensure that your new handle is compatible with the spindle's length.
Once you have determined the proper size for the handle, screw it into the correct position. It is important to make sure that the new handle is firmly fixed and is turning in the correct way (clockwise for open or counterclockwise for closed). It is also crucial to ensure that it is not installed upside down.
In the end, you must replace the screw cover caps. Once you have done this, you can test the handle to ensure that it works correctly. You can also test the locking mechanism by moving the handle from the unlocked position to the locked and back.
3. Take off the Screws
A uPVC handle is an important element of any home and is the first thing that shows signs of wear or damage. This can be caused by natural causes or from frequent use, and sometimes malicious damage caused by opportunistic criminals who may seek to open a closed window and gain access to your property. A simple replacement can solve the issue and prevent it from happening again.
uPVC handles can also be difficult to open if the locking mechanism isn't working properly. In most cases, the issue can be solved by replacing the multipoint lock rather than the entire handle, and it's definitely worth a look since it can save you money.
After you've removed the old handle, you'll have to remove the screws that were that held it in place. upvc replacement door handles are usually located on the inside of the handle base. It could be necessary to use a screwdriver in order to do this. Be careful not to over tighten the handle since this could cause it to loosen.
Then, you'll have to find the screws or pins that hold the handle in place. They're usually on the inside of the handle base. You'll need a screwdriver to remove them. If you wish to replace them, you should replace the caps on the screw and test the handle to ensure it functions correctly.
Install the handle by aligning the spindle to the cutout in the window mechanism. Then screw it in. If you want to replace the screw covers ensure that the handle is in a position that is open and any screws are securely attached. It's done! You can enjoy the newly installed window handle. This should allow you to avoid costly window and door replacements in the near future. Contact us if need more information on this or any other aspect of your uPVC window.
4. Fit the New Handle
If you're replacing a damaged handle or simply updating it, the process is surprisingly simple and can be completed in just a few steps. The first step is to determine the kind of handle, take measurements of its spindle and know what tools you will need to complete the job. Safety is always the first priority when working with windows and tools. It's also important to be patient and follow the steps carefully to ensure that you have a functional handle that is safe to use.
To begin, find the screws that hold your window handle. Remove them while firmly holding the handle to stop it from falling and causing an injury. After the screws have been removed, you can put them in a safe place to be replaced in the future.
After you have removed the handle, you can now begin installing your new handle. It is crucial that the handle fits perfectly to ensure it functions correctly and locks the window in place. Then you need to slide the square metal bar on the handle into the hole for the window mechanism.
After the new handle is installed, the final step is to replace the caps on the screws and check to see if it works. If you're not happy with the result or if your window doesn't open and close as it should the next step is to contact our experts who can assist you.
Most UK homes have uPVC Windows. Therefore, a large number of windows will require replacement at some point due to wear and tear or breakage. Anyone with some DIY knowledge can carry out the process. It is essential that the handle you use matches the size and style of the window. If you're not sure about the kind of handle you'll require, don't hesitate to reach out to our team, who will be able to guide you through the choices available.